Skip to Main Content
IBM Power Ideas Portal


This portal is to open public enhancement requests against IBM Power Systems products, including IBM i. To view all of your ideas submitted to IBM, create and manage groups of Ideas, or create an idea explicitly set to be either visible by all (public) or visible only to you and IBM (private), use the IBM Unified Ideas Portal (https://ideas.ibm.com).


Shape the future of IBM!

We invite you to shape the future of IBM, including product roadmaps, by submitting ideas that matter to you the most. Here's how it works:

Search existing ideas

Start by searching and reviewing ideas and requests to enhance a product or service. Take a look at ideas others have posted, and add a comment, vote, or subscribe to updates on them if they matter to you. If you can't find what you are looking for,

Post your ideas
  1. Post an idea.

  2. Get feedback from the IBM team and other customers to refine your idea.

  3. Follow the idea through the IBM Ideas process.


Specific links you will want to bookmark for future use

Welcome to the IBM Ideas Portal (https://www.ibm.com/ideas) - Use this site to find out additional information and details about the IBM Ideas process and statuses.

IBM Unified Ideas Portal (https://ideas.ibm.com) - Use this site to view all of your ideas, create new ideas for any IBM product, or search for ideas across all of IBM.

ideasibm@us.ibm.com - Use this email to suggest enhancements to the Ideas process or request help from IBM for submitting your Ideas.

ADD A NEW IDEA

My ideas: Hardware Management Console

Showing 81

HMC Central Patch Management for AIX, PowerVM, Firmware and Microcode

HMC should have a Patch Management: Central Patch Management for AIX, PowerVM, Firmware and Microcode. IBM should provide a easy way for Patch Management. System Firmware and Adapter microcode report in one tool (something Microcode Discovery tool...
8 months ago in Hardware Management Console 13 Planned for future release

Allow Simplified HMC based Remote Restart to recreate LPAR on target system even with reduced paths to the LUN

Simplified HMC based Remote Restart is currently not successful if the check on the target system results in a reduced number of paths to the LUN. This is the case with a HyperSwap configuration in the event of a data center failure (storage and s...
5 months ago in Hardware Management Console 1 Planned for future release

HMC should work as ntp server for eBMC ntp clients

As Pete Heyrman documented: The enterprise baseboard management controller (eBMC) was introduced in Power10 and provides similar system management functionality as the FSP. With respect to time, the eBMC time-of-day clock cannot be synced with the...
11 months ago in Hardware Management Console 2 Planned for future release

Provide Prometheus exporter for LPAR and System data in HMC

Please provide a Prometheus exporter for the HMC which cound be used for sending system and partition utilization data to prometheus timeseries database. This would be very helpful to consolidate performance data in a single place together with ot...
9 months ago in Hardware Management Console 1 Planned for future release

HMC automated installation

It's possible to have option for fully automated installation physical HMC and virtual HMC ? This is time consuming in case IBM support request as part of solution reinstallation of HMC code and restore configuration from backup. It will simplify ...
6 months ago in Hardware Management Console 1 Planned for future release

The power consumption per LPAR (memory, CPU) should be visible in the HMC.

The power consumption per LPAR (memory, CPU) should be visible in the HMC. This should also be available for the entire managed system. The energy costs calculated down to the work performed is becoming increasingly important for customers when th...
about 1 year ago in Hardware Management Console 0 Planned for future release

LPM should not switch to Default Processor Pool

During LPM via HMC-GUI (V10 R3 SP1051 / MF71688) the setting for processor pool switches back to the Default Processor Pool, if not explicitely changed by drop-down menu. Since Processor Pools are very important to us (licences) AND there's a veri...
5 months ago in Hardware Management Console 0 Planned for future release

Add Location option per managed system (chpcm - change Performance and Capacity Monitoring settings)

Add Location option per managed system (chpcm - change Performance and Capacity Monitoring settings) e. g. chpcm -l "location" to reflect where the managed system resides and to be able to achieve more granularity, when it comes to sustainability ...
5 months ago in Hardware Management Console 1 Planned for future release

1040 dashboard improvement: Resource summary : partitions deactivated instead of warning

1040 dashboard design changed required to improve user experience: under Resource summary ; remove deactivated partitions from the warning counter. Or even better let the deactivated partions have a unique counter: i.e. "inactive".
over 1 year ago in Hardware Management Console 0 Planned for future release

Show HMC Firewall "Available applictions" in HMC CLI

I would like to see possibility to list all possible Applications that can be configured on HMC firewall, on HMC CLI in a similar way as they are shown in HMC GUI (see atttached screenshot) Currently lshmc --firewall gives list only for the rules ...
8 months ago in Hardware Management Console 1 Planned for future release