IBM Power Ideas Portal


This portal is to open public enhancement requests against IBM Power Systems products, including IBM i. To view all of your ideas submitted to IBM, create and manage groups of Ideas, or create an idea explicitly set to be either visible by all (public) or visible only to you and IBM (private), use the IBM Unified Ideas Portal (https://ideas.ibm.com).


Shape the future of IBM!

We invite you to shape the future of IBM, including product roadmaps, by submitting ideas that matter to you the most. Here's how it works:

Search existing ideas

Start by searching and reviewing ideas and requests to enhance a product or service. Take a look at ideas others have posted, and add a comment, vote, or subscribe to updates on them if they matter to you. If you can't find what you are looking for,

Post your ideas

  1. Post an idea.

  2. Get feedback from the IBM team and other customers to refine your idea.

  3. Follow the idea through the IBM Ideas process.


Specific links you will want to bookmark for future use

Welcome to the IBM Ideas Portal (https://www.ibm.com/ideas) - Use this site to find out additional information and details about the IBM Ideas process and statuses.

IBM Unified Ideas Portal (https://ideas.ibm.com) - Use this site to view all of your ideas, create new ideas for any IBM product, or search for ideas across all of IBM.

ideasibm@us.ibm.com - Use this email to suggest enhancements to the Ideas process or request help from IBM for submitting your Ideas.

ADD A NEW IDEA

All ideas

Showing 4500

HMC GUI Limitation

When we are using multiple Vswitches in the POWER H/W frames, HMC GUI is not detecting any Vswitch other than the Default Vswitch "ETHERNET0”(During the LPM activity ) . This issue creates lot of problems if we use HMC GUI for the LPM activities. ...
over 4 years ago in Hardware Management Console 1 Future consideration

hmc ssh syslog facility

HMC ssh logging facility using syslog
over 3 years ago in Hardware Management Console 1 Future consideration

Automatically address file issue on the QAS9PALEVT file reaching full

The maximum size has been reached for member QAS9PALEVT file QAS9PALEVT in library QSRVAGT.
4 months ago in IBM i / System Management 2 Submitted

Db2 service WRKCFGSTS

Create a Db2 for i service that does the equivalent of the WRKCFGSTS command where I can check if a device, or range devices selected by a wildcard, is varied on or off. Use Case: Rather than use WRKCFGSTS *DEV *TAP to see if all of the tape drive...
over 3 years ago in IBM i / Db2 for i 5 Future consideration

Provide plug-in mechanism for iACS

Provide a formal plug-in interface for iACS to allow developers to provide extensions to the existing functionality. Use Case: A plug-in interface to iACS would allow vendors, and open source developers, to provide additional functionality to vari...
over 3 years ago in IBM i / IBM i Access Family 3 Not under consideration

RDi should bring me to source of Serviceprogram procedure

Within RDi I can directly go to the source of a Copy Book (/copy or /include) and within RDi 9.6.0.11 I even can see that source directly. The same functionality is needed for procedures used in our code when they are somehow bonded to the program...
almost 3 years ago in IBM i / RDi (Rational Developer for i) 4 Future consideration

Support for untagged vNICs in PowerVC

PowerVC only supports tagged VLANs when using vNICs. If a VM has Port VLAN ID 0, which means untagged, the VM can't be managed by PowerVC. PowerVC should also be able to manage and deploy VMs with untagged vNICs.
almost 4 years ago in PowerVC 0 Future consideration

HMC Callhome, event notifications and classifications

After setup of HMC event notifications, to see what's going on (heads up), I now get loads of mail (where many are more or less “info” / reboot HMC only solution). Example:Reporting system: itseelm-bb6095Machine type-model/serial: 7063-CR1/130NCPA...
about 3 years ago in Hardware Management Console 0 Future consideration

CLI command to list LPAR description and Group tags

HMC V10R1 GUI allows you to define LPAR/VM description and group tags. This is wonderful feature specially on a multi-tenancy system. However, there is no CLI command to list this information. We use the CLI command for ease of reporting.
over 2 years ago in Hardware Management Console 2 Planned for future release

Powervc should warn the administrator about disruptive operations

In some cases powervc can initiate a disruptive change when performing a seemingly non invasive operation, such as adding a new volume. It performs the change in the background that can cause an outage of the VM, for example when zonemanager decid...
7 months ago in PowerVC 0 Submitted

By clicking the "Post Comment" or "Submit Idea" button, you are agreeing to the IBM Ideas Portal Terms of Use.
Do not place IBM confidential, company confidential, or personal information into any field.