IBM Power Ideas Portal


This portal is to open public enhancement requests against IBM Power Systems products, including IBM i. To view all of your ideas submitted to IBM, create and manage groups of Ideas, or create an idea explicitly set to be either visible by all (public) or visible only to you and IBM (private), use the IBM Unified Ideas Portal (https://ideas.ibm.com).


Shape the future of IBM!

We invite you to shape the future of IBM, including product roadmaps, by submitting ideas that matter to you the most. Here's how it works:

Search existing ideas

Start by searching and reviewing ideas and requests to enhance a product or service. Take a look at ideas others have posted, and add a comment, vote, or subscribe to updates on them if they matter to you. If you can't find what you are looking for,

Post your ideas

  1. Post an idea.

  2. Get feedback from the IBM team and other customers to refine your idea.

  3. Follow the idea through the IBM Ideas process.


Specific links you will want to bookmark for future use

Welcome to the IBM Ideas Portal (https://www.ibm.com/ideas) - Use this site to find out additional information and details about the IBM Ideas process and statuses.

IBM Unified Ideas Portal (https://ideas.ibm.com) - Use this site to view all of your ideas, create new ideas for any IBM product, or search for ideas across all of IBM.

ideasibm@us.ibm.com - Use this email to suggest enhancements to the Ideas process or request help from IBM for submitting your Ideas.

ADD A NEW IDEA

My ideas: Hardware Management Console

Showing 368 of 4496

HMC Reconnect

The option to signoff from the HMC with a disconnect allowing you to reconnect a session at later time.
about 5 years ago in Hardware Management Console 3 Future consideration

RFE to request bundling of Anti Virus into the hmc application or some other AV software, Preferably Crowdstrike AV

Adding an Antivirus engine would enhance protecting against vulnerabilities; real time monitoring, all would benefit in todays cyber attack environment
over 1 year ago in Hardware Management Console 0 Under review

HMC bonding of private LAN

I would like to be able to team the private LAN as well as the public LAN on the HMC. Now that the HMC supports bonding, I'm not sure why it doesn't work for the private LAN to the managed node FSPs.
about 5 years ago in Hardware Management Console 1 Not under consideration

Dual HMC configuratrion with managed servers across two networked sites.

We have two HMC's in two separate sites. They managing the same managed systems as a dual-hmc configuration. The managed systems are also split across the two sites. Calls home for systems can be a challenge for support reps to correctly place the...
almost 7 years ago in Hardware Management Console 1 Not under consideration

ADD ADAPTER and REMOVE would benefit if SYSTEM BUS NUMBER was shown

When moving Physical IO adapters from one partition to the other the SYSTEM BUS number and the Location Code of the adapter are the two pieces of information Clients use to Confirm they are moving the intended adapter. The SYSTEM BUS number is the...
over 5 years ago in Hardware Management Console 1 Planned for future release

As part of the IBM PMR - TS0022011993, need to add SNI functionality for HMC's

From: aix_support@ecurep.ibm.com [mailto:aix_support@ecurep.ibm.com] Sent: Tuesday, 7 May 2019 12:53 AMTo: Balamurugan ViswanathanCc: Abhijit Debnath2; Madhubabu Singamala1; Roshan Naran; Shine Ouseph; Westpac Gd Vio India; Bhati, Kuldeep; Nepomuc...
over 5 years ago in Hardware Management Console 0 Future consideration

LPM test frame size

LPMs fail when interfaces have different frame sizes (normal -vs- jumbo), please add a check for network frame size as part of the LPM pre-move validation.
over 5 years ago in Hardware Management Console 2 Not under consideration

Need to have an option to check SRIOV physical port MAC address when it is used in shared mode

There should be an option to check SRIOV physical port MAC address when the adapter is used in shared mode. For now, HMC GUI list the physical port MAC address only if the frame is powered on with hardware discovery otherwise there is no way to fi...
almost 4 years ago in Hardware Management Console 2 Not under consideration

Disable sensitive information on welcome page starting with version 8.6.0-SP1

Since update of 8.6.0 to SP1 the welcome page of the HMC displays different information from our hardware systems including information about servicable events etc.
over 7 years ago in Hardware Management Console 4 Not under consideration

Default HMC console language selection

When connecting to a hardware management console via 5250 emulator console session, you must select your language option. (we always use option 21) It would be nice to have a feature to default to a preferred language selection.
over 5 years ago in Hardware Management Console 2 Not under consideration

By clicking the "Post Comment" or "Submit Idea" button, you are agreeing to the IBM Ideas Portal Terms of Use.
Do not place IBM confidential, company confidential, or personal information into any field.