IBM Power Ideas Portal


This portal is to open public enhancement requests against IBM Power Systems products, including IBM i. To view all of your ideas submitted to IBM, create and manage groups of Ideas, or create an idea explicitly set to be either visible by all (public) or visible only to you and IBM (private), use the IBM Unified Ideas Portal (https://ideas.ibm.com).


Shape the future of IBM!

We invite you to shape the future of IBM, including product roadmaps, by submitting ideas that matter to you the most. Here's how it works:

Search existing ideas

Start by searching and reviewing ideas and requests to enhance a product or service. Take a look at ideas others have posted, and add a comment, vote, or subscribe to updates on them if they matter to you. If you can't find what you are looking for,

Post your ideas

  1. Post an idea.

  2. Get feedback from the IBM team and other customers to refine your idea.

  3. Follow the idea through the IBM Ideas process.


Specific links you will want to bookmark for future use

Welcome to the IBM Ideas Portal (https://www.ibm.com/ideas) - Use this site to find out additional information and details about the IBM Ideas process and statuses.

IBM Unified Ideas Portal (https://ideas.ibm.com) - Use this site to view all of your ideas, create new ideas for any IBM product, or search for ideas across all of IBM.

ideasibm@us.ibm.com - Use this email to suggest enhancements to the Ideas process or request help from IBM for submitting your Ideas.

ADD A NEW IDEA

My votes: Hardware Management Console

Showing 366 of 4449

ADD ADAPTER and REMOVE would benefit if SYSTEM BUS NUMBER was shown

When moving Physical IO adapters from one partition to the other the SYSTEM BUS number and the Location Code of the adapter are the two pieces of information Clients use to Confirm they are moving the intended adapter. The SYSTEM BUS number is the...
about 5 years ago in Hardware Management Console 1 Planned for future release

As part of the IBM PMR - TS0022011993, need to add SNI functionality for HMC's

From: aix_support@ecurep.ibm.com [mailto:aix_support@ecurep.ibm.com] Sent: Tuesday, 7 May 2019 12:53 AMTo: Balamurugan ViswanathanCc: Abhijit Debnath2; Madhubabu Singamala1; Roshan Naran; Shine Ouseph; Westpac Gd Vio India; Bhati, Kuldeep; Nepomuc...
over 5 years ago in Hardware Management Console 0 Future consideration

LPM test frame size

LPMs fail when interfaces have different frame sizes (normal -vs- jumbo), please add a check for network frame size as part of the LPM pre-move validation.
over 5 years ago in Hardware Management Console 2 Not under consideration

Need to have an option to check SRIOV physical port MAC address when it is used in shared mode

There should be an option to check SRIOV physical port MAC address when the adapter is used in shared mode. For now, HMC GUI list the physical port MAC address only if the frame is powered on with hardware discovery otherwise there is no way to fi...
over 3 years ago in Hardware Management Console 2 Not under consideration

Default HMC console language selection

When connecting to a hardware management console via 5250 emulator console session, you must select your language option. (we always use option 21) It would be nice to have a feature to default to a preferred language selection.
over 5 years ago in Hardware Management Console 2 Not under consideration

Disable sensitive information on welcome page starting with version 8.6.0-SP1

Since update of 8.6.0 to SP1 the welcome page of the HMC displays different information from our hardware systems including information about servicable events etc.
over 7 years ago in Hardware Management Console 4 Not under consideration

Add shared processor pool to partition table view

Add the shared processor pool that partitions are in as a column option on the partition list table view. This would make it much easier to manage multiple shared processor pools. The information appears in HMC scanner, but that's a lot of effort ...
almost 2 years ago in Hardware Management Console 0 Future consideration

Enable tunneling in the Enhanced GUI

With the addition of the Enh GUI, there is a redirect during login. This is causing the failure, and it's unfortunately a permanent restriction and does not work with tunnelinmg.This RFE is to have that functionality of tunneling enabled in the En...
about 6 years ago in Hardware Management Console 2 Not under consideration

lack of AC power status in IBM Power servers

Hello. Please refer to PMH 74741,820,820 and RCMS 820,01DNGBS. In case of AC power failure, only loss of power is recorded in ASMI. Moreover, if two power supplies fail - only one failure is recorded at ASMI. When AC power comes back - there is no...
about 6 years ago in Hardware Management Console 0 Under review

Move away from VFAT file system on USB devices on the HMC

The current VFAT filesystem used when formatting a USB stick on the HMC supports a maximum file size of 4GB. ISO images for updates now exceed this limit (e.g MF70257 for V10R1M1020 is 4.24GB). This means a USB device formatted on the HMC can no l...
about 2 years ago in Hardware Management Console 0 Future consideration

By clicking the "Post Comment" or "Submit Idea" button, you are agreeing to the IBM Ideas Portal Terms of Use.
Do not place IBM confidential, company confidential, or personal information into any field.