IBM Power Ideas Portal


This portal is to open public enhancement requests against IBM Power Systems products, including IBM i. To view all of your ideas submitted to IBM, create and manage groups of Ideas, or create an idea explicitly set to be either visible by all (public) or visible only to you and IBM (private), use the IBM Unified Ideas Portal (https://ideas.ibm.com).


Shape the future of IBM!

We invite you to shape the future of IBM, including product roadmaps, by submitting ideas that matter to you the most. Here's how it works:

Search existing ideas

Start by searching and reviewing ideas and requests to enhance a product or service. Take a look at ideas others have posted, and add a comment, vote, or subscribe to updates on them if they matter to you. If you can't find what you are looking for,

Post your ideas

  1. Post an idea.

  2. Get feedback from the IBM team and other customers to refine your idea.

  3. Follow the idea through the IBM Ideas process.


Specific links you will want to bookmark for future use

Welcome to the IBM Ideas Portal (https://www.ibm.com/ideas) - Use this site to find out additional information and details about the IBM Ideas process and statuses.

IBM Unified Ideas Portal (https://ideas.ibm.com) - Use this site to view all of your ideas, create new ideas for any IBM product, or search for ideas across all of IBM.

ideasibm@us.ibm.com - Use this email to suggest enhancements to the Ideas process or request help from IBM for submitting your Ideas.

ADD A NEW IDEA

Hardware Management Console

Showing 367

Ansible Collection ibm.power_hmc: Secrets from environment variables, extra_vars and AWX/AAP secrets

Dear IBM team, the Ansible Collection ibm.power_hmc lacks a secure way to provide secrets at the moment. Could you please add native support for secrets lookup from environment variables, Ansible extra_vars and AWX/AAP secrets? This makes the usag...
5 months ago in Hardware Management Console 1 Under review
143 VOTE

Dynamically editable min/max fields when LPAR gets shut down

When you are on a partitions memory configuration section and the partition is running you can only change the allocated value and the min/max values are greyed out. When the partition is then shut down the min/max values should be editable but th...
over 3 years ago in Hardware Management Console 3 Future consideration

HMC automated installation

It's possible to have option for fully automated installation physical HMC and virtual HMC ? This is time consuming in case IBM support request as part of solution reinstallation of HMC code and restore configuration from backup. It will simplify ...
5 months ago in Hardware Management Console 1 Planned for future release
123 VOTE

HMC Performance Dashboard shows different calculated graphs depending if the LPAR is in Shared-Pool and Dedicated Mode

At the moment the HMC Performance Dashboard is using a different calculation method - depending on the LPAR using Shared-Pool or Dedicated-Donating Mode - to display the CPU utilization graph without any hint of these differences. Both graphs are ...
almost 3 years ago in Hardware Management Console 2 Future consideration

Capacity/Performance Management

HMC should provide the same detail level and functionality like lpar2rrd in point of Capacity and Performance management.
7 months ago in Hardware Management Console 2 Future consideration

Option to set "correct" time when cold starting partition

This idea is especially for IBMi partitions, but maybe other platforms have similar requirements. There are ibmi partitions, for example -cold stand-by / DR purposes or -that are started from resp. created by a flash copy operation (starting the l...
19 days ago in Hardware Management Console 0 Submitted

Provide Prometheus exporter for LPAR and System data in HMC

Please provide a Prometheus exporter for the HMC which cound be used for sending system and partition utilization data to prometheus timeseries database. This would be very helpful to consolidate performance data in a single place together with ot...
8 months ago in Hardware Management Console 1 Planned for future release

The power consumption per LPAR (memory, CPU) should be visible in the HMC.

The power consumption per LPAR (memory, CPU) should be visible in the HMC. This should also be available for the entire managed system. The energy costs calculated down to the work performed is becoming increasingly important for customers when th...
12 months ago in Hardware Management Console 0 Planned for future release

HMC should work as ntp server for eBMC ntp clients

As Pete Heyrman documented: The enterprise baseboard management controller (eBMC) was introduced in Power10 and provides similar system management functionality as the FSP. With respect to time, the eBMC time-of-day clock cannot be synced with the...
10 months ago in Hardware Management Console 2 Planned for future release

Add Location option per managed system (chpcm - change Performance and Capacity Monitoring settings)

Add Location option per managed system (chpcm - change Performance and Capacity Monitoring settings) e. g. chpcm -l "location" to reflect where the managed system resides and to be able to achieve more granularity, when it comes to sustainability ...
4 months ago in Hardware Management Console 1 Planned for future release

By clicking the "Post Comment" or "Submit Idea" button, you are agreeing to the IBM Ideas Portal Terms of Use.
Do not place IBM confidential, company confidential, or personal information into any field.