Skip to Main Content
IBM Power Ideas Portal


This portal is to open public enhancement requests against IBM Power Systems products, including IBM i. To view all of your ideas submitted to IBM, create and manage groups of Ideas, or create an idea explicitly set to be either visible by all (public) or visible only to you and IBM (private), use the IBM Unified Ideas Portal (https://ideas.ibm.com).


Shape the future of IBM!

We invite you to shape the future of IBM, including product roadmaps, by submitting ideas that matter to you the most. Here's how it works:

Search existing ideas

Start by searching and reviewing ideas and requests to enhance a product or service. Take a look at ideas others have posted, and add a comment, vote, or subscribe to updates on them if they matter to you. If you can't find what you are looking for,

Post your ideas
  1. Post an idea.

  2. Get feedback from the IBM team and other customers to refine your idea.

  3. Follow the idea through the IBM Ideas process.


Specific links you will want to bookmark for future use

Welcome to the IBM Ideas Portal (https://www.ibm.com/ideas) - Use this site to find out additional information and details about the IBM Ideas process and statuses.

IBM Unified Ideas Portal (https://ideas.ibm.com) - Use this site to view all of your ideas, create new ideas for any IBM product, or search for ideas across all of IBM.

ideasibm@us.ibm.com - Use this email to suggest enhancements to the Ideas process or request help from IBM for submitting your Ideas.

ADD A NEW IDEA

All ideas

Showing 14

CMC to support dual HMC

Currently we can add two HMC for a power hardware, but i guess it actively uses only one. As soon as the active hmc gets disconnects or frame-hmc connection fails, CMC dont display frame(systems) information all over the place. primarly PEP2 appli...
about 2 years ago in Cloud Management Console 3 Needs more information

A system needs to have the ability to call home when the slot on the bus is owned by the operating system (IBMi, AIX, Linux) and there is no hardware error logged as currently a system can only call home

There are cases where an issue has occurred on a system where data cannot pass but no hardware error has been logged. This can affect any adapter that passes data and is owned by the operating system. If this occurs, IBM cannot be automatically no...
8 months ago in IBM i / Core OS 4 Needs more information

PEP 2.0 Support for Novalink/CMC

Request to enhance MCM to support Novalink with PEP 2.0 capacity Credits.
almost 3 years ago in Cloud Management Console 5 Needs more information

Checking power consumption of a server from log or via command

Checking power consumption of a server from log or via command. Currently, we have an option to check a particular server power consumption from the PDU ( if connected separately) or from the outside cables using a meter. This needs a personal vis...
over 4 years ago in Hardware Management Console 3 Needs more information

BRMS ICC - avoid loop when no more media available (using volume prefixes)

Hello, That it might be interesting not to loop the backup when there is no more media available. we always get Cartridge xxx not available message in BRMS log when job is stuck. Regards, Axel C.
3 months ago in IBM i / BRMS 1 Needs more information

SEA over a 10Gb Ethernet Port in VIOS. Allow Virtual Ethernet Adapters in client partitions to run at 10Gb rather than a maximum of 1Gb.

Current limitation of Virtual Ethernet Adapters to run at 1Gb. If a 10Gb Ethernet port is set up as an SEA in VIOS, then client partitions using the bridge of virtual to physical are limited by the Virtual Ethernet Adapter maximum of 1Gb bandwidth...
over 2 years ago in PowerVM VIOS 1 Needs more information

After VIOS complete boot to trigger any IBM i VMs to start

We could not find a mechanism to start IBM i VMs after VIOS complete IPL. This is necessary for unattended operations in case of power failure or a complete reboot of the hardware is required. VIOS starts automatically after the hardware is starte...
about 1 year ago in PowerVM VIOS 1 Needs more information

Use of Kurbenetes for DOORS

We are working at Valeo on DOORS application at AWS, and with a pool of Application servers that have the Client version installed -> Front End (FE), and other pool that have the Database -> Back End (BE). We have dimension the servers with ...
over 1 year ago in Cloud Management Console 1 Needs more information

Alerting by email when threshold is exceeded

Hello, In the Capacity Monitoring settings, we can set thresholds But when a threshold il exceeded, it appears in red in the interface but no alert is sent by email. We would like to be able to receive this alert by email Cordialy François Maliverney
almost 2 years ago in Cloud Management Console 2 Needs more information

Want to see in a vnicserver output in a VIOS the client partition name and if it is AIX or Linux Client

Help to configure proper card parameter for vNIC
about 2 years ago in PowerVM VIOS 2 Needs more information